Pages

Kết nối thương hiệu

Timhang24h.com - website mua bán và giới thiệu sản phẩm uy tín, chất lượng, chuyên nghiệp cho cộng đồng thương mại điện tử Việt Nam.

Kết nối thương hiệu

Timhang24h.com - website mua bán và giới thiệu sản phẩm uy tín, chất lượng, chuyên nghiệp cho cộng đồng thương mại điện tử Việt Nam.

Kết nối thương hiệu

Timhang24h.com - website mua bán và giới thiệu sản phẩm uy tín, chất lượng, chuyên nghiệp cho cộng đồng thương mại điện tử Việt Nam.

Kết nối thương hiệu

Timhang24h.com - website mua bán và giới thiệu sản phẩm uy tín, chất lượng, chuyên nghiệp cho cộng đồng thương mại điện tử Việt Nam.

Kết nối thương hiệu

Timhang24h.com - website mua bán và giới thiệu sản phẩm uy tín, chất lượng, chuyên nghiệp cho cộng đồng thương mại điện tử Việt Nam.

Monday, August 27, 2012

YAMAHA XS650 BY CR351


YAMAHA XS650 BY CR351

1972 Yamaha XS650
Here’s a textbook example of a clean, low budget Yamaha XS650 custom. A 1972 machine, it was rescued from the junkyard and built for Hugo Ramos, publisher of the Portuguese café racer magazine REV.
It’s a relatively simple build as far as customs go, but the detailing is immaculate, the styling is bang-on and there’s careful fabrication alongside the bought-in parts.
1972 Yamaha XS650
It’s the work of César “Thruxtonic”, who runs the Portuguese moto forum CR351, and forum member “HZolio”. Their brief was to construct an inexpensive, lightweight bike with good handling and street-tracker style.
1972 Yamaha XS650
The frame was stripped back, repaired and restored, and the motor was completely rebuilt. The stock Mikuni BS38 carbs were upgraded with a kit from XS Performance, who also supplied the tapered pod air filters. “The exhaust pipes are something cheap, to keep the budget under control,” says César. “They have a good sound, if a bit loud for my taste.” (The exhaust headers were in poor shape, hence the heat wrap.)
1972 Yamaha XS650
Instrumentation is simple and unusual: a multi-function Sigma 1609 STS bicycle computer, which is a wireless system. “I wanted the front of the bike very light and clean,” César explains. He also hid the horn and even the brake master cylinder, which is now under the tank.
Custom parts include the under-seat box, which holds a tiny battery—a 12V-0.8A unit measuring just 96 x 25 x 62 mm—and assorted electrics. There’s a fabricated fork brace to stiffen the steering and the front fender is custom-molded from PVC. Adjustable Hagon 2819 shocks and a lustrous deep-red paintjob complete the build.
1972 Yamaha XS650

RADICAL DUCATI WILDCAT


RADICAL DUCATI WILDCAT

Ducati Monster 1100 custom
Spain is a hotbed of custom motorcycle building at the moment, and Radical Ducati is at the forefront of the performance-oriented scene.
Wildcat is the latest creation from Pepo Rosell and Reyes Ramon. It’s built around a blueprinted Monster 1100 Evo engine with a carbon fiber airbox, so it’s not short on power. (The muffler, believe it or not, is from a BMW.)
Ducati Monster 1100 custom
The motor nestles in Radical Ducati’s lightweight RAD 02 frame, with a chrome-moly main frame and an aluminum subframe. The swingarm is from a Monster S2R, and the wheels are BST carbon fiber items. That gorgeous, sculptural tank is aluminum, and left bare.
Ducati Monster 1100 custom
Hit the Bike EXIF Archives for our coverage of previous Radical Ducati builds. Just make sure you’ve got plenty of time to spare …
Ducati Monster 1100 custom
Ducati Monster 1100 custom

BONNEVILLE SPEEDWEEK TRITON


BONNEVILLE SPEEDWEEK TRITON

Triton motorcycle
The lure of the salt at Bonneville Speedweek is strong, and two years ago, the bug bit Vincent Prat of the French Southsiders MC collective. This year, he’s returning with his own motorcycle to ride, the extraordinary Triton you see here.
The story of this machine begins 25 years ago, when Vincent bought a Rickman frame and started searching for parts to build a road racer. In those pre-internet days, it proved to be a difficult task. And then Vincent was offered an exchange: his Rickman project for a collection of Triton bits, including a “wideline” frame, a Triumph T120 unit engine, and Norton Roadholder forks.
Triton motorcycle
Vincent finished building the Triton in 1992, and it became his regular ride. In 2000 he mothballed the machine and moved on to other projects. But standing on the salt two years ago, he imagined the Triton resurrected—into this sleek machine.
Triton motorcycle
He dismantled the Triton and conferred with two of France’s leading motorcycle builders: the metalwork specialist Momo, and engine guru Henri Lao Martinez. Momo fashioned the beautiful dustbin fairing, modified the frame to suit a seat made by Claude Carrière, and created the sinuous exhaust system.
Triton motorcycle
Martinez rebuilt the engine with a lighter crank, stronger T140 rods and a trick Dresda top end. The spark is now provided by a Pazon electronic ignition system, and the primary drive is a Tony Hayward belt system. Amal 30mm concentric carbs take care of fueling.
Triton motorcycle
Vincent reassembled the Triton and fettled it into shape. It’s now safely packed up in a crate, and on its way to the USA. (Unfortunately, eligibility rules mean that the dustbin fairing will be left in France.)
At Bonneville, the bike will become part of “The Impossible Team”, with Spaniards Juan Ramón Ortega and El Solitario on the baking hot salt.
The only thing missing is a name. Vincent has asked us to help, so please jump over to our Facebook page and add your suggestions here.
Photography by Benoit Guerry, © Guerry & Prat Images.
Triton motorcycle

LOADED GUN CAFE RACER


LOADED GUN CAFE RACER

Triumph Bonneville cafe racer
If there’s a dominant custom trend today, it’s dark and minimal. Bikes are being stripped of chrome and artifice, and generally look the better for it. But there’s always an exception, and in this case, it’s the “72 Mono Racer” from Loaded Gun Customs.
If the name is familiar to you, it’s probably because Delaware-based LGC have featured in all three series of Café Racer TV. This is their latest build, a pale and interesting cafe racer that started life as a 1972 Bonneville.
Triumph Bonneville cafe racer
There’s a lot of traditional fabrication going on here—from nickel-plating to CNC machining. Indeed, the only stock parts are the rebuilt engine and core frame. The forks are resprung and valved Yamaha XS650 items, a mono shock takes care of the rear, and the swingarm is from a Ducati. Brakes are modern Beringer six-piston components, matched to lightweight aluminum Sun rims.
Triumph Bonneville cafe racer
It’s a simple and elegant approach, and reminds me of Lotus founder Colin Chapman’s dictum to “add lightness”. What’s the betting that this Bonneville is a barrel of fun to ride, too?
Images courtesy of Ken Driscoll.
Triumph Bonneville cafe racer
Triumph Bonneville cafe racer





















































http://www.timhang24h.com/forum.php

CAFE RACER BMW R100


CAFE RACER BMW R100

Cafe Racer BMW R100
For custom builders, older BMW airheads are starting to approach Honda CB and Triumph Bonneville levels of popularity. This one was built by Aric Russom, an artist and photographer from Western Massachusetts. He’s owned the BMW for 13 years, and in that time, has given it two major overhauls.
This is a café racer in the truest sense: it’s had a serious bump in performance as well as a change in aesthetics. Russom has fitted higher-compression heads with bigger valves, Nikasil cylinders and a lightened flywheel. The carbs are now Mikuni flatslides and the stainless mufflers are from Cone Engineering.
Cafe Racer BMW R100
Handling gets an upgrade with the front end from a BMW K100, fitted with dual-piston calipers to improve braking. At the back are Works Performance shocks and those lovely laced rims are from Woody’s Wheel Works. (A front fender and fork brace will be installed soon.)
Cafe Racer BMW R100
The stock bars have been swapped out for Tarozzi clip-ons, nestling behind a custom fairing shaped by Glass From The Past. The seat is an original Knoscher fitment. The rearsets are from the San Jose BMW custom range, and the single minimal gauge is an Acewell, providing just the essential information a rider needs to know.
Cafe Racer BMW R100
Dark paint and both ceramic and powder coating provide the finishing touch. It’s simple and sleek, and a delightful new lease of life for a 34-year-old bike.
Cafe Racer BMW R100










AC SANCTUARY KAWASAKI KZ1000



Kawasaki KZ1000
Late 70s Japanese superbikes have character by the bucketload—unlike the plasticized contemporary offerings. There’s ample performance too: a stock Kawasaki KZ1000 puts out around 90 hp, and can run the quarter mile in just over 12 seconds.
Unfortunately, the dynamics of such bikes have fallen a long way behind modern standards. And that’s where the custom workshop AC Sanctuary steps in, restoring and modifying machines like this KZ1000 Mk II.
Kawasaki KZ1000
As you’d expect from one of Japan’s leading specialists, the attention to detail is top-notch. The frame has been cleaned up, and reinforced to increase stiffness to 21st century levels. The forks, 17” wheels and front fender are from a Yamaha XJR1200, with braking duties handled by a mix of Sunstar, Nissin and Brembo parts.
Kawasaki KZ1000
The KZ1000’s engine has been overbored and blueprinted. It’s now fed by Keihin FCR37 carburetion, with gases exiting into a Nitro Racing exhaust system. (Nitro Racing also supplies the seat and rearsets.) A nine-inch Earl’s oil cooler keeps temperatures down inside the DOHC inline 4, and the clutch is a strengthened item from the police-spec KZ1000. Michelin Pilot Road II sport-touring tires keep the show on the road.
Kawasaki KZ1000
If you live in Japan, it’d cost the equivalent of $42,000 to park this KZ1000 in your garage. But I suspect that every time you fire up the engine, it’d feel like money well spent.
Check out our coverage of past Sanctuary builds here. (And don’t blame us if you’re tempted to book the next flight out to Tokyo.)
Kawasaki KZ1000

1940 INDIAN BY THE GASBOX


1940 INDIAN BY THE GASBOX

Indian custom motorcycle by The GasBox
Every year, the Quail Motorcycle Gathering attracts enthusiasts and well-heeled collectors from all over the world to Carmel, California. The quality of machinery is one drawcard; another is the chance to rub shoulders with the likes of Mert Lawwill and Wayne Rainey.
Of course, there’s also a competition—and the most interesting class for us is “Custom/Modified”. This year, second place went to this beautifully-crafted Indian motorcycle, a 741 Scout built by Jesse Bassett and his sidekick Tim Fiorucci of The GasBox, Ohio.
Indian custom motorcycle by The GasBox
Bassett decided to knock fifteen years off his 1941 Scout, and give it a flavor of Indians from the 1920s. So he raised the top frame rail to sit flush with new hand-formed aluminum split fuel tanks. He then stretched the frame itself four inches, moving the downtube in front of the generator to clean up the lines of the bike.
Indian custom motorcycle by The GasBox
The stance was improved by modifying the girder forks and front axle position, which allowed Bassett to fit 19” Dunlop rims front and rear. The top of the girder was narrowed two inches to reduce visual bulk still further and the bars are modified Harley panhead items. The front hub is original Indian, and the rear is from a Triumph. The headlamp is a 1920s automotive lamp and Bassett hand-spun the bezel from brass to replace the damaged original.
Indian custom motorcycle by The GasBox
The original Indian engine was kept, but completely rebuilt and mated to a Norton Commando four-speed transmission, giving the rider one more gear than the original. To accommodate the Norton diaphragm clutch, Bassett made new engine plates; the primary was cut in half, offset, and mated with a 1920s Indian outer primary. Finally, all of the aluminum was polished, and the entire frame and fork were nickel plated before being painted in a traditional Indian red.
The machine wowed the judges — which included Paul “The Vintagent” d’Orleans — and earned Jesse and Tim a much-deserved trophy. Head over to The GasBox website for more images and details of their other builds, including a beautiful 1949 Panhead.
Indian custom motorcycle by The GasBox

CUSTOM YAMAHA XS400


Custom Yamaha XS400
At first glance, I thought this was an OEM bike—perhaps a mid-80s enduro. But it’s actually a heavily modified and beautifully crafted Yamaha XS400, built by Seth Hensler.
The distinctive XT350 tank dominates the look of this machine, but that was the easiest part. Seth is one of life’s natural mechanics, and no challenge is too big for him. “I always wanted a twin-cylinder dual sport, so I made one,” he says. After finding a 1981 XS400 for just $100, he set to work in his garage.
Custom Yamaha XS400
The frame is mostly custom-built, with XT350 suspension grafted on. Seth freshened up the engine, and then fitted Mikuni VM 30 carbs and the exhaust cans from a Honda CR250F. Braking has also been upgraded, with the rear brakes converted to a modern disc setup from a Yamaha YZ250. The wheels are now 21” at the front and 19” at the back, running Metzeler and Shinko rubber.
Custom Yamaha XS400
As the images show, Seth likes to take his bike for a blast around the back roads. “It runs and sounds great,” he reports. For the full build story, check out this thread on the excellent Do The Ton forum. And for an alternative approach to XS400 customs, check out this Yamaha XS400 tracker we featured a few months ago.
Custom Yamaha XS400










CUSTOM MOTO GUZZI LE MANS


Custom Moto Guzzi Le Mans Mk III
Last month’s Wheels & Waves festival in Biarritz was a barometer of custom motorcycle taste in Europe. I was struck by the amount of attention attracted by older Moto Guzzis, especially those with a raw cafe racer look. This bike wasn’t at the festival, but it’s a perfect example of classic Guzzi style. Called “Scoro”, it’s owned by Berliner Sven Wedemeyer.
Sven started making changes as soon as he bought this Le Mans Mark III. “My love for cafe racers is huge, so I decided to rebuild it,” he says. “For me, it’s about sound, feeling and style.”
Custom Moto Guzzi Le Mans Mk III
He stripped the Guzzi back to its component parts and installed shortened BMW K100 forks and the brakes from his own Ducati 900SS. After using the Guzzi as his daily ride, he decided to take it a step further and transform it into the full-on cafe racer we see here.
Custom Moto Guzzi Le Mans Mk III
“My vision of the bike was flat and sleek: the filler cap had to be the highest point,” says Sven. “The name Scoro came to my mind: an amalgam of Scura (meaning ‘dark’) and ‘oro’ (‘gold’).”
Sven ripped the Guzzi apart a second time and had the frame shortened, cleaned and powder coated. The engine and drive train were overhauled by Urban Motor, and after Sven put everything back together again, he fitted a minimal electrical system with equally minimal Motogadget instrumentation.
Custom Moto Guzzi Le Mans Mk III
Other upgrades include Öhlins rear shocks, open Dell’Orto carbs and an original Lafranconi Competizione exhaust system. There’s also a Ducati steering damper, a custom front fender, and bespoke bars and grips.
“I really love this bike and it offers everything I need. You feel very fast on it … more than 120 kph on the speedo and you feel like lightning. The sound, especially in a tunnel, has a quality that no other engine can cope with.”
For more images and technical details, head over to the Urban Motor website.
Custom Moto Guzzi Le Mans Mk III

CRD #15 BONNEVILLE


Custom Triumph Bonneville by CRD
If you live near Madrid and you want to add a custom touch to your Bonneville, you’re in luck. Cafe Racer Dreams have made a name for themselves with tweaked Triumphs and Honda CBs, and this is #15, their latest build.
It’s a 2007-model bike, the year when the Bonneville was given a capacity boost to 865cc and the engine was finished in black. CRD’s upgrades to this bike are relatively few, but they’ve given it a whole new stance and a strong retro feel.
Custom Triumph Bonneville by CRD
The stock 17” rear rim has been replaced with a heavily-shouldered 18” rim, as you might find on a vintage Guzzi. The tires are Dunlop K180s, and the back end is now anchored by Hagon shocks. Up front are CRD’s favorite Renthal bars and matching enduro-style switchgear. Behind you’ll find a new aluminum battery box, a chopped rear subframe and a custom seat unit.
Custom Triumph Bonneville by CRD
The green paint on the tank is a color that was offered on the Jaguar E-Type. But the crowning glory is the magnificent new exhaust system, painstakingly welded and terminated in a short and veryfruity-sounding muffler.
Custom Triumph Bonneville by CRD
This bike has now been sold to a customer over the border in Marseille, France. Next up, we’re told, is a BMW R75 custom—so keep an eye on the CRD website and Facebook page for that one.
Custom Triumph Bonneville by CRD